Fire Extinguishers - PW, WC, WM & CD Series
Submittal and Detail Sheet
PROJECT:LOCATION:
MODEL NUMBER: QUANTITY:
ARCHITECT:CONTRACTOR:
DATE:DISTRIBUTOR:

PW, WC and WM Series PW SERIES-Pressurized Water
This unit is ideally suited for all industrial and commercial applications, where easy to use, positive on-off operation is important. Water is used as the extinguishing agent, making it highly effective on deep seated Class A fires. (Shipped empty.)

WC SERIES-Wet Chemical
Wet Chemical units are designed specifically for kitchen grease fire hazards and meet the new K class listing now required for all extinguishers installed in restaurant kitchens. They contain a special potassium acetate based, low PH agent, which leaves no chemical residue to clean up. The spray applicator wand keeps the operator at a safe distance from the fire. Larger 2-1/2 gallon unit with identical U.L. rating is available. (shipped charged)

WM SERIES-Water Mist
This unit is designated for use wherever there is a Class A hazard near electrical equipment and the environment is of paramount concern. The extinguishing agent is de-ionized water, and the wand provides greatest operator safety. There is no risk of electrical conductivity or thermal or static shock. Ideal for use in health care, data processing, telecommunication, and clean room facilities. (shipped empty)

MODEL
NUMBER		 NOMINAL
CAPACITY		 SHIPPING
WEIGHT		 CYLINDER
DIAMETER		 OVERALL
HEIGHT		 OVERALL
WIDTH		 UL
RATING		 STANDARD
BRACKET*		 OPTIONAL
BRACKET*
PW2½
WC-6L
WM2½		 2½ gal.
6 liters
2½ gal.		 7½ lbs.
23 lbs.
9 lbs.		 7 in.
7 in.
7 in.		 24½ in.
25 in.
26 in.		 9 in.
9 in.
11 in.		 2A
2A:K
2A:C		 1007
1007
1007		 B1,864
B1
864

CD Series Fire Extinguishers CD SERIES—Carbon Dioxide
These units contain liquid carbon dioxide under pressure. It is discharged as a white cloud of "snow," which effectively smothers a fire. Carbon dioxide is a clean, non-conductor of electricity for Class B and C fires.

All carbon dioxide units feature:

  • 0-ring seal, straight thread brass valve-fits all size
  • Absolutely rust free aluminum cylinders
  • Up to 30% lighter
MODEL
NUMBER		 NOMINAL
CAPACITY		 SHIPPING
WEIGHT		 CYLINDER
DIAMETER		 OVERALL
HEIGHT		 OVERALL
WIDTH		 UL
RATING		 STANDARD
BRACKET*		 OPTIONAL
BRACKET*
CD5
CD10
CD15
CD20		 5 lbs.
10 lbs.
15 lbs.
20 lbs.		 14 lbs.
28¼ lbs.
37¾ lbs.
50¾ lbs.		 5¼ in.
7 in.
7 in.
8 in.		 17¾ in.
24 in.
30 in.
30 in.		 8¼ in.
12 in.
12 in.
13 in.		 5-B:C
10:B:C
10:B:C
10:B:C		 546
575
575
577		 862
864
864
864

Bracket Options for PW,WC,WM,CD Series Fire Extinguishers

*NOTE: Standard brackets are included with all extinguishers at no additional cost. If specified, optional brackets are only available at additional cost. All of the above brackets are designed to accommodate Larsen's extinguishers. While most comparably sized extinguishers usually will function with the above brackets, Larsen's cannot assume responsibility for variations in cylinder dimensions among various extinguisher suppliers.
LARSEN'S MANUFACTURING COMPANY
7421 Commerce Lane N.E., Minneapolis, MN 55432
Phone: (763) 571-1181 FAX: (763) 571-6900

www.larsensmfg.com

FLORIDA DIVISION:
3130 N.W. 17th Street, Ft. Lauderdale, FL 33311
Phone: (954) 486-3325 FAX: (954) 486-3352

© 2006 Larsen's Mfg. Co.