Architectural Series Fire Extinguisher Cabinets
Submittal and Detail Sheet
PROJECT:LOCATION:
MODEL NUMBER: QUANTITY:
ARCHITECT:CONTRACTOR:
DATE:DISTRIBUTOR:
SPECIFICATIONS:
All recessed and semi-recessed cabinets and surface-mounted steel cabinets have a heavy gauge, white baked enamel box. Surface-mounted cabinets with aluminum door and trim have a box constructed entirely of clear or color anodized aluminum. Surface-mounted cabinets with stainless steel door and trim have a box constructed entirely of 304 stainless steel with a #4 finish.

Steel and stainless steel cabinets have a full ½" thick hollow metal heavy gauge door. Trims and doors feature one piece construction with satin finish pull handle, continuous matching hinge, and self-adjusting roller catch. Baked white enamel finish is standard for steel units. Stainless steel cabinets have a #4 finish, 304 stainless steel.

Aluminum cabinet doors and trims are extruded or fabricated aluminum with clear satin anodized finish. Aluminum door is ½" thick with satin finish matching pull handle and hinge. Color anodized finishes are available as options.

STEP 1: Select cabinet model number from the dimensions in the table below and indicate on the top of this sheet. To specify aluminum trim and door, use the prefix, "AL" before the model number. To specify stainless steel trim and door, use the prefix, "SS" before the model number. Note: Rough opening dimensions are larger for fire-rated cabinets. Please refer to separate Fire-Rated Cabinet Submittal and Detail Sheet.

STEP 2: Select Door Style and Door Glazing (if applicable) below:
Door Style
Door Glazing:
Clear Acrylic (Standard) Clear Tempered Safety Glass Clear Wire Glass
Laminated Safety Glass Bronze Acrylic Gray Acrylic Other

*NOTE: Solid Door with Larsen-Loc® can be specified as Institutional Door (access only with key) by deleting the pull handle and decal.

STEP 3: Indicate Trim and Door Material:
Steel Aluminum (AL) Stainless (SS) Other (Specify)

STEP 4: Indicate Trim Projection Below:
 Trim Projection

STEP 5: Select Optional* Die Cut Lettering Style and Color:
Lettering Style
Black
White
Red
Other

*Die cut lettering is available at additional cost. Standard application of lettering is on the metal section of the door - not on the glazing. Decals also are available and are shipped loose for jobsite application.

Trimless cabinets must be installed before the drywall because their plaster stops must be behind the drywall.
Trimless cabinets are not recommended for block wall installation.
* See back of this sheet or attached sheet for Recessed Handle (required only for 4" return trims when ADA wall projection compliance is necessary)
CABINET DIMENSIONS - ARCHITECTURAL SERIES
Model
Number		 Trim Style
and
Projection		 Inside Box
Dimensions
H x W x D		 Outside Trim
Dimensions
H x W**		 Rough
Opening
H x W x D		 Recommended
Extinguisher
Capacity
2409-R1 Rec. 5/16 24 x 9½ x 5* 27½ x 13 25 x 10½ x 5¼ MP2½,MP5,
MP5-A,DC2½,
DC5, HT2½", HT5
2409-5R Semi-Rec. 1½ 24 x 9½ x 5* 27½ x 13 25 x 10½ x 4
2409-R3 Semi-Rec. 2½ 24 x 9½ x 5* 27½ x 13 25 x 10½ x 3
2409-R2 Rec. 5/16 24 x 9½ x 6 27½ x 13 25 x 10½ x 6¼ MP2½,MP5,
MP5-A,DC2½,
DC5,MP6,MP10,
DC6,DC10,CD5
HT2½", HT5
2409-R7 Semi-Rec. 1½ 24 x 9½ x 6 27½ x 13 25 x 10½ x 5
2409-6R Semi-Rec. 2½ 24 x 9½ x 6 27½ x 13 25 x 10½ x 4
2409-R4 Semi-Rec. 3½ 24 x 9½ x 6 27½ x 13 25 x 10½ x 3
2409-RM Semi-Rec. 4½ 24 x 9½ x 6 27½ x 13 25 x 10½ x 2
2409-RT Trimless 24 x 9½ x 6 -- x x 6½"
2409-SM Surface Mtd. 27½ x 13 x 6 27½ x 13 --
2409-RA Semi-Rec. 4 24 x 9½ x 6 27½ x 13 25 x 10½ x 2½
*Depth of these cabinets is 4¾" when supplied with aluminum door and frame. The AL 2409-5R has a 1¼" square trim.
2712-R Rec. 5/16 27 x 12 x 8 30½ x 15½ 28 x 13 x 8¼ All of Above
PW2½",MP20,
DC20,CD10
WC-6L
HT11, HT15½"
2712-RK Semi-Rec. 1¼ 27 x 12 x 8 30½ x 15½ 28 x 13 x 7¼
2712-RL Semi-Rec. 2½ 27 x 12 x 8 30½ x 15½ 28 x 13 x 6
2712-RM Semi-Rec. 4½ 27 x 12 x 8 30½ x 15½ 28 x 13 x 4
2712-RT Trimless 27 x 12 x 8 - x x x 8½"
2712-SM Surface Mtd. 30½ x 15½ x 8½ 30½ x 15½ --
2712-RA Semi-Rec. 4 27 x 12 x 8 30½ x 15½ 28 x 13 x 4½
2720-R Rec. 5/16 27 x 20 x 8 30½ x 23½ 28 x 21 x 8¼ Two Each of
the Listed:
PW2½",MP10
DC10,MP20
DC20,CD5,CD10
WC-6L,HT11,HT15½"
2720-RK Semi-Rec. 1¼ 27 x 20 x 8 30½ x 23½ 28 x 21 x 7¼
2720-RL Semi-Rec. 2½ 27 x 20 x 8 30½ x 23½ 28 x 21 x 6
2720-RM Semi-Rec. 4½ 27 x 20 x 8 30½ x 23½ 28 x 21 x 4
2720-RT Trimless 27 x 20 x 8 -- x x 8½"
2720-SM Surface Mtd. 30½ x 23½ x 8½ 30½ x 23½ --
2720-RA Semi-Rec. 4 27 x 20 x 8 30½ x 23½ 28 x 21 x 4½
3012-R Rec. 5/16 30 x 12 x 8 33½ x 15½ 31 x 13 x 8¼ Same as 2712
3012-RK Semi-Rec. 1¼ 30 x 12 x 8 33½ x 15½ 31 x 13 x 7¼
3012-RL Semi-Rec. 2½ 30 x 12 x 8 33½ x 15½ 31 x 13 x 6
3012-RM Semi-Rec. 4½ 30 x 12 x 8 33½ x 15½ 31 x 13 x 4
3012-RT Trimless 30 x 12 x 8 -- x x 8½
3012-SM Surface Mtd. 33½ x 15½ x 8½ 33½ x 15½ --
3012-RA Semi-Rec. 4 30 x 12 x 8 33½ x 15½ 31 x 13 x 4½
3612-R Rec. 5/16 36 x 12 x 8 39½ x 15½ 37 x 13 x 8¼ Same as
2712
FB 3612 OPTION:
w/Shelf &
Fire Blanket
3612-RK Semi-Rec. 1¼ 36 x 12 x 8 39½ x 15½ 37 x 13 x 7¼
3612-RL Semi-Rec. 2½ 36 x 12 x 8 39½ x 15½ 37 x 13 x 6
3612-RM Semi-Rec. 4½ 36 x 12 x 8 39½ x 15½ 37 x 13 x 4
3612-RT Trimless 36 x 12 x 8 -- x x 8½"
3612-SM Surface Mtd. 39½ x 15½ x 8½ 39½ x 15½ --
3612-RA Semi-Rec. 4 36 x 12 x 8 39½ x 15½ 37 x 13 x 4½
M3216-R Rec. 5/16 32 x 16 x 8 35½ x 19½ 33 x 17 x 8¼ PW2½",MP20,
DC20,CD10,
CD15,WM2½"
M3216-RK Semi-Rec. 1¼ 32 x 16 x 8 35½ x 19½ 33 x 17 x 7¼
M3216-RL Semi-Rec. 2½ 32 x 16 x 8 35½ x 19½ 33 x 17 x 6
M3216-RM Semi-Rec. 4½ 32 x 16 x 8 35½ x 19½ 33 x 17 x 4
M3216-RT Trimless 32 x 16 x 8 -- x x 8½"
M3216-SM Surface Mtd. 35½ x 19½ x 8½ 35½ x 19½ --
M3216-RA Semi-Rec. 4 32 x 16 x 8 35½ x 19½ 33 x 17 x 4½

Trimless cabinets must be installed before the drywall because their plaster stops must be behind the drywall.
Trimless cabinets are not recommended for block wall installation.
** Deduct ¾" from HxW dimensions for cabinets with aluminum trim.
*** Rough openings are larger for fire-rated cabinets. Please refer to Fire-rated Extinguisher Cabinet Submittal and Detail Sheet.

NOTE: Semi-recessed and surface mounted cabinet compliance with ADA wall projection guidelines depends on several location and installation issues. Please refer to page 2 of Larsen's 10520/LAR Catalog.

OPTIONAL "FIRE" HANDLE
optional fire handle
Standard Red Black White
OPTIONAL RECESSED HANDLE
optional recessed handle

LARSEN'S MANUFACTURING COMPANY - www.larsensmfg.com
7421 Commerce Lane N.E., Minneapolis, MN 55432 Phone: (763) 571-1181 FAX: (763) 571-6900
FLORIDA DIVISION: 3130 N.W. 17th Street, Ft. Lauderdale, FL 33311 Phone: (954) 486-3325 FAX: (954) 486-3352
©2007 Larsen's Mfg. Co.