Larsen's Mfg.

Call us Today!    1-800-527-7367


www.larsensmfg.com
Larsen's Manufacturing

FIRE HOSE AND VALVE CABINETS

VC1818 and VC2626 SERIES

TO SPECIFY THE VC1818 and VC2626 SERIES:

  1. Insert, after "VC," the appropriate prefix for the trim and door material (please refer HOW TO SPECIFY AND ORDER LARSEN'S FIRE HOSE AND VALVE CABINETS).
    If STEEL - Use S.
    If ALUMINUM - Use AL.
    If STAINLESS STEEL - Use SS.
    If BRASS - Use B. If BRONZE - Use BZ.
  2. Select the required model number from the table below.
  3. Select the door style from the illustrations on HOW TO SPECIFY AND ORDER LARSEN'S FIRE HOSE AND VALVE CABINETS.
VC1818 and VC2626 SERIES VC2626
The VC2626 Series is designed specifically to meet fire codes which require the continuous revolution of a 12" long spanner wrench.
Model
Number
Trim Style
and
Projection
Inside Box
Dimensions
H x W x D
Outside Trim
Dimensions
H x W***
Rough
Opening
H x W x D
Knockout
Locations**
E       G
Interior
Capacity
  VC1818-R Rec. 5/16 18 x 18 x 8 21½ x 21½ 19 x 19 x 8¼ 9"     4" One 2½"
Fire Dept.
valve
with
cap and
chain
FS VC1818-R Rec. 5/16 18 x 18 x 8 21½ x 21½ 201/8 x 201/8 x 91/8 --
  VC1818-RK Semi-Rec. 1¼ 18 x 18 x 8 21½ x 21½ 19 x 19 x 7¼ 9"     4"
FS VC1818-RK Semi-Rec. 1¼ 18 x 18 x 8 21½ x 21½ 201/8 x 201/8 x 81/8 --
  VC1818-RL Semi-Rec. 2½ 18 x 18 x 8 21½ x 21½ 19 x 19 x 6 9"     4"
FS VC1818-RL Semi-Rec. 2½ 18 x 18 x 8 21½ x 21½ 201/8 x 201/8 x 7 --
  VC1818-RT Trimless 18 x 18 x 8 -- --x --x8½ 9"     4"
  VC1818-SM Surface Mtd. 21½ x 21½ x 8½ 21½ x 21½ -- --
  VC2626-R Rec. 5/16 26 x 26 x 8 29½ x 29½ 27 x 27 x 8¼ 13"     4" One 2½"
Fire Dept.
valve
with
cap and
chain
FS VC2626-R Rec. 5/16 26 x 26 x 8 29½ x 29½ 281/8 x 281/8 x 91/8 --
  VC2626-RK Semi-Rec. 1¼ 26 x 26 x 8 29½ x 29½ 27 x 27 x 7¼ 13"     4"
FS VC2626-RK Semi-Rec. 1¼ 26 x 26 x 8 29½ x 29½ 281/8 x 281/8 x 81/8 --
  VC2626-RL Semi-Rec. 2½ 26 x 26 x 8 29½ x 29½ 27 x 27 x 6 13"     4"
FS VC2626-RL Semi-Rec. 2½ 26 x 26 x 8 29½ x 29½ 281/8 x 281/8 x 7 --
  VC2626-RT Trimless 26 x 26 x 8 -- --x --x8½ 13"     4"
  VC2626-SM Surface Mtd. 29½ x 29½ x 8½ 29½ x 29½ -- --
NOTE: "FS" models denote Larsen's "Flame-Shield" fire-rated cabinets. When specifying Larsen's "Flame-Shield" fire-rated cabinet option for the VC1818 and VC2626 Series, refer to the dimension chart above and select the models with an "FS" prefix. No knock-outs are provided with fire-rated cabinets. Pipe holes must be drilled by installer and complete instructions are supplied with each fire-rated valve cabinet. For complete details of the "Flame-Shield" option.

VC4016 and VC3616 SERIES

Larsen's exclusive VC4016 and VC3616 Series provide an attractive, innovative, and economical method of housing a fire extinguisher and a fire department valve. Both the VC4016 and VC3616 support the extinguisher with a heavy gauge shelf. The shelf in both units is located 12" up from the bottom of the cabinet, leaving approximately 28" for the extinguisher height in the VC4016 and 24" in the VC3616.

A more economical option is available for both units. As pictured at the left, the shelf can be deleted with the valve installed at the top of the cabinet. With this option, the "F" dimension for the knockout location (see chart at left) is measured from the top of the cabinet. To specify this unit, see below.

TO SPECIFY THE VC4016 and VC3616 SERIES:

  1. Insert, after "VC," the appropriate prefix for the trim and door material (please refer to page 13).
    If STEEL - Use S. If ALUMINUM - Use AL. If STAINLESS STEEL - Use SS.
    If BRASS - Use B. If BRONZE - Use BZ.
  2. Select the required model number from the table below.
  3. If the Gemini Door is required, see DESIGNER LINE DOOR STYLE OPTIONS - GEMINI and use the prefix "G" before the model number. If the Occult Door is required, refer to OCCULT SERIES and use the prefix "O" before the model number
  4. Select the door style from the illustrations.
  5. If the shelf is to be deleted with the valve installed at the top, insert the prefix "T" before "VC" and note the appropriate knockout location.
VC4016 T-VC 4016
Model
Number
Trim Style
and
Projection
Inside Box
Dimensions
H x W x D
Outside Trim
Dimensions
H x W***
Rough
Opening
H x W x D
Knockout
Locations**
E   F   G
Interior
Capacity
  VC4016-R Rec. 5/16 40 x 16 x 8 43½ x 19½ 41 x 17 x 8¼ 6"     4" One 2½"
Fire Dept
valve
with cap
and chain
and a
Fire
Extinguisher
FS VC4016-R Rec. 5/16 40 x 16 x 8 43½ x 19½ 421/8 x 181/8 x 91/8 --
  VC4016-RK Semi-Rec. 1¼ 40 x 16 x 8 43½ x 19½ 41 x 17 x 7¼ 6"     4"
FS VC4016-RK Semi-Rec. 1¼ 40 x 16 x 8 43½ x 19½ 421/8 x 181/8 x 81/8 --
  VC4016-RL Semi-Rec. 2½ 40 x 16 x 8 43½ x 19½ 41 x 17 x 6 6"     4"
FS VC4016-RL Semi-Rec. 2½ 40 x 16 x 8 43½ x 19½ 421/8 x 181/8 x 7 --
  VC4016-RT Trimless 40 x 16 x 8 -- --x --x8½ 6"     4"
  VC4016-SM Surface Mtd. 43½ x 19½ x 8½ 43½ x 19½ -- --
  VC3616-R Rec. 5/16 36x 16 x 8 39½ x 19½ 37 x 17 x 8¼ 6"     4" One 2½"
Fire Dept
valve with
cap and
chain and
one of the
following
Fire Ext.
MP2½,MP5,
DC2½,DC5,
MP6,MP10,
DC6,DC10,
CD5,HT5,HT11,
HT15½,WC6-L
FS VC3616-R Rec. 5/16 36x 16 x 8 39½ x 19½ 381/8 x 181/8 x 91/8 --
  VC3616-RK Semi-Rec. 1¼ 36x 16 x 8 39½ x 19½ 37 x 17 x 7¼ 6"     4"
FS VC3616-RK Semi-Rec. 1¼ 36x 16 x 8 39½ x 19½; 381/8 x 181/8 x 81/8 --
  VC3616-RL Semi-Rec. 2½ 36x 16 x 8 39½ x 19½ 37 x 17 x 6 6"     4"
FS VC3616-RL Semi-Rec. 2½ 36x 16 x 8 39½ x 19½ 381/8 x 181/8 x 7 --
  VC3616-RT Trimless 36x 16 x 8 -- --x --x8½ 6"     4"
  VC3616-SM Surface Mtd. 39½ x 19½ x 8½ 39½ x 19½ -- --
NOTE: "FS" models denote Larsen's "Flame-Shield" fire-rated cabinets. When specifying Larsen's "Flame-Shield" fire-rated cabinet option for the VC3616 and VC4016 Series, refer to the dimension chart above and select the models with an "FS" prefix. No knock-outs are provided with fire-rated valve cabinets. Pipe holes must be drilled by installer and complete instructions are supplied with each fire-rated valve cabinet. For complete details of the "Flame-Shield" option.
** No knockouts are provided for surface-mounted cabinets unless specified.
Trimless cabinets must be installed before the drywall. Plaster stop must be behind the drywall.
Trimless are not recommended for block wall installation.
*** Deduct ¾ from HxW Dimensions for Cabinets with Aluminum Door & Trim. This does not apply to "FS" fire-rated option.

Contact Larsen's Mfg. - Request More Info

If you would like us to contact you or provide more information please use the online form below. Please note we respect your privacy and will not distribute your information including email address to anyone else. Thank You!
Name: Additional comments or specific questions:
E-mail:
Phone (required):
More information about:
How did you find us?
Minneapolis Division
7421 Commerce Lane N.E., Minneapolis, MN 55432
Phone: (763) 571-1181    Toll Free: 1-800-527-7367
Fax: (763) 571-6900
Florida Division
3130 N.W. 17th St., Ft. Lauderdale, FL 33311
Phone: (954) 486-3325    Toll Free: 1-800-262-3473
Fax: (954) 486-3352

©1999-2007 Larsen's Manufacturing Company
Website Design and Hosting by www.ManagementSpecialties.com